Home > Environment > TIMKEN Bearing Maintenance Method

TIMKEN Bearing Maintenance Method

wallpapers Environment 2020-12-04
1. TIMKEN bearing grease lubrication:
 
The relubrication of TIMKEN bearings is best implemented during the planned equipment shutdown period and regularly replenished. At the same time, the old grease is removed, or the old grease is squeezed out through the oil drain hole.
 
Before adding fresh grease, wipe the grease nipple clean. If the bearing box does not have a grease nozzle, the bearing box cover or end cover should be opened to take out the old grease. After cleaning, add fresh grease of the same model.
 

2. TIMKEN bearing lubricant lubrication:
 
Regularly check the oil level and quality of the lubricating oil. In general, the normal oil level should be within the range of 1/3-2/3 of the equipment oil level window or mark.
 
If the oil replenishment method is an oil cup, the displayed oil level only represents the oil replenishment capacity, while the oil level of the bearing box meets the operating requirements. When the oil level in the oil cup is less than 1/4 of its total volume, replenishment can be considered. oil.
 
Inspection and replenishment methods, take out a small amount of lubricating oil as a sample, and compare with fresh lubricating oil, capable units may consider conducting oil quality tests to ensure that the oil quality is qualified.
 
If the sample of TIMKEN bearing looks like a cloud, it may be the result of mixing with water, which is the oil emulsification that everyone often says. At this time, the lubricant should be replaced.

Say something
  • All comments(0)
    No comment yet. Please say something!
Tag:
Prev: No Page
Next: No Page