Answers

  • 0
  • 0

What are the effects of admixtures on foam concrete

After Russia pledged to scale back its military operations around Kyiv and in northern Ukraine, the prices of most industrial metals fell, led by aluminum, showing people's concerns for supply shortage eased.

At an earlier time, the West imposed sweeping sanctions on Russia for its invasion of Ukraine, which aroused concerns about the supply problem because Russia is a major producer of nickel, aluminum, and copper. 

Russia is also a major gas supplier to Europe, where potential supply disruptions are seen as hitting power-intensive aluminum and zinc foam concrete,foaming agent,concrete curing agent are still very uncertain.

To study the problem of collapse mode cracking in the cast-in-place foam concrete wall, using ordinary Portland cement, fly ash, and self-made composite foaming agent as the primary raw materials, the admixtures (there are two kinds of admixtures) were studied through single-factor experiments. One is a foaming agent, and the other is concrete curing agent.


According to the characteristics of the foaming agent that the foam pore size can be adjusted freely, and the preparation is atomized and diluted during use. The pore size is more acceptable and uniform (the pore size is less than 1mm). The light foam and slurry are mixed to make a lightweight concrete microporous slurry. The porosity in the slurry accounts for 70% of the total volume of the foamed concrete. The foams in the slurry are closed by a water film. They are not connected, which improves the problem of high water absorption in traditional concrete and improves the frost resistance and impermeability of foam concrete. It has a specific activation effect on fly ash. 


The slurry in the pouring and forming stage has self-leveling characteristics, good pore structure, smooth entry into the mold, and rapid thickening and forming. Ensure the stability of expansion and improve the strength of foam concrete blocks. Foamed concrete has excellent properties such as lightweight, heat preservation, heat insulation, sound insulation, etc., and it has low production investment. It can use a large amount of industrial waste residue. Its application is of great significance to building energy conservation and environmental protection, so it will gradually replace concrete construction.

According to previous studies, with the increase of fly ash content, the amount of cement decreases, and the early compressive strength of concrete drops significantly. However, fly ash has pozzolanic activity, and in an alkaline environment, with the increase of concrete age, the compressive strength of high-volume fly ash foam concrete will increase significantly. In addition, the large amount of fly ash dramatically reduces the number of harmful pores, improves the compactness of the slurry structure, and is beneficial to the later strength increase.


In recent years, the application of foamed concrete has developed rapidly, but there are still a series of problems in the cast-in-place foamed concrete insulation wall:

(1) Foam concrete has low strength and is not suitable as a load-bearing wall material;

(2) Prefabricated blocks increase the process and engineering costs;

(3) Dry shrinkage of foam concrete and cracking caused by dry-wet cycle and loose structure, due to the problems of collapsed form and easy carbonization due to the influence of pouring height, seriously restrict the broad application of foam concrete.


TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

If you are looking for high quality foaming agent, please feel free to contact us and send an inquiry.

sales@cabr-concrete.com



Overall, the demand for foam concrete,foaming agent,concrete curing agent is on the rise, and future foam concrete,foaming agent,concrete curing agent will continue to evolve. Although the prosperity of the brand name has rebounded, there are still many outstanding problems in foam concrete,foaming agent,concrete curing agent, and the foam concrete,foaming agent,concrete curing agent will develop steadily,if you need foam concrete,foaming agent,concrete curing agent please contact us.

Inquery us

Our Latest Answers

What is Strontium hydroxide?

Recently, OPEC and the International Energy Agency (IEA) have made two different judgments on oil demand forecasts, which makes the already unpredictable price of crude oil even more complicated.OPEC believes that as rising prices put pressure on bus…

How is chromium silicide CrSi2 powder produced

Chromium silicide, known as CrSi2 powder, is an inorganic silicide that is dark gray powder. For chromium silicide films, glass coatings, silicide targets, silicide sputtering targets and N-type semiconductors.…

Function and overview of titanium carbide TiC powder

Titanium carbide TiC powder is a crystalline solid with gray metallic luster, hard quality, second only to diamond in hardness, and weaker in magnetic properties. For the manufacture of cemented carbide, also used as electrodes and abrasives for arc…