For billionaires, the new crown epidemic is like a 'gold rush'! The Deutsche Presse-Agentur said on the 17th that in 2022, the wealth held by the world's top ten richest people will jump from $700 billion to $1.5 trillion, an average daily increase of $1.3 billion, an increase that exceeds the past 14 years. These 10 people The wealth held by the world’s poorest 3.1 billion people is six times greater than that of the world’s poorest 3.1 billion people. The 10 richest Germans have increased their assets from the equivalent of about 125 billion euros to about 223 billion euros since the start of the Covid-19 pandemic, An increase of about 78%. This wealth is roughly equivalent to the total wealth of the poorest 40% of the population, or 33 million Germans.
In the future, demand for 3D printing metal powder will grow as fast as the wealth of the rich during the pandemic.
Scientists at Skoltech University in Russia used a 3D printer to create an alloy of two materials whose composition ratios varied from one region of the sample to the next, and the resulting alloy had gradient magnetism, even though none of the initial materials were magnetic.
3D printing, a rapid prototyping method, is maturing for aircraft parts, medical implants and prosthetics, jewelry, custom shoes, and more.
The main advantage of 3D printing is the ability to create objects with very complex shapes that are either too expensive to produce or completely impossible to produce using traditional casting, rolling, stamping, or machining methods. 3D printing speeds up prototyping time and offers greater flexibility in product personalization and the number of batches. Another significant advantage of 3D printing is its low waste.
However, 3D printing has its limitations, requiring objects to be made entirely of homogeneous materials or mixtures. If the composition is different in different parts of the product, it is possible to obtain samples with changing characteristics. For example, A bar made of an alloy of two metals has A variable ratio of composition: one end starts with 100 percent of metal A, then 50 percent of each, then 100 percent of metal B, and so on. Thus, the properties of the obtained materials (including magnetic materials) can vary in a gradient, which makes them potentially useful for the manufacture of motor rotors, magnetic encoder strips, transformers, etc.
Skoltech scientists have researched and made such a kind of material, with the original ingredients A and B being two alloys: aluminum-bronze (copper, aluminum, and iron) and austenitic stainless steel (iron, chromium, and nickel, among others). Both alloys are paramagnetic, which means they are not attracted by magnets. But if you mix them, you get what's called a "soft magnetic material" ferromagnet, which is attracted to a permanent magnet.
The researchers used the two paramagnetic materials to create a gradient alloy. They used an InssTekMX-1000 3D printer, which works by depositing material using directional energy action, feeding a powdery material, and melting it with a laser at the same time. The resulting materials exhibit varying degrees of ferromagnetic properties, depending on the proportions of the components.
The researchers also theorized that the atomic structure of the alloy contributes to the expression of ferromagnetism in the alloy: although both materials have so-called face-centered cubic crystal structures, the combination results in a magnetic body-centered cubic structure.
Gradient soft magnetic alloys can be used in mechanical engineering, for example, in the production of electric motors. The results also show that the method of surface treatment of materials using directional energy action can not only obtain gradient materials using 3D printing but also discover new alloys. The technology is efficient and suitable for the rapid production of large parts.
3D Printing powder Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest 3D printing powder price, you can send us your inquiry for a quote. ([email protected])
3D Printing powder Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and nanomaterials including silicon powder, nitride powder, graphite powder, zinc sulfide, calcium nitride, 3D printing powder, etc.
If you are looking for high-quality 3D printing powder, please feel free to contact us and send an inquiry. ([email protected])
At present, international supply chains were shocked, and logistics and transportation efficiency decreases. Geopolitical conflicts further aggravate uncertainties about the European and American economic recovery and the global commodity supply. For this reason, I assume the price of the 3D printing metal powder would not decrease significantly in the short term.
Magnesium Ingot Introduction Among the different metals that are used to cast dies that magnesium is the most sought-after. Its qualities make it attractive to die-casters and users. It's used to make strong and lightweight aluminum-magnesium alloys…
Market trend of ceramic sand custom investment casting The global market sales of…
What's Potassium stearate ? Potassium stearate may also be referred for its alias "potassium octadecanoate". White powder with crystalline structure. It is soluble in hot water and insoluble in ether, chloroform as well as carbon disulfide. The aqueo…