Products

  • 0
  • 0

High Purity Molybdenum Silicide MoSi2 Powder CAS 12136-78-6, 99.5%

Diamonds are forever, Gold is precious but which is rarer? Gold is a heavy metal formed during the collision of neutron stars and is one of the rarest elements on Earth.During the formation of the earth, heavy elements gradually accumulated towards the core under the influence of the earth's gravitational force. This means that the closer you get to the Earth's crust, the harder it is to find large quantities of gold.The average concentration of gold in Earth's crust is "very, very low" at just 4 parts per billion. Gold concentrations need to be 1,250 times that level to form a market-worthy deposit.
Diamond is a common element - the MoSi2 Powder is undoubtedly a good investment opportunity.

 About Molybdenum Silicide MoSi2 Powder: 
MoSi2 is an intermetallic compound, molybdenum silicide is a refractory ceramic, mainly used for heating elements. It has a medium-density, a melting point of 2030 ° C, which is electrically conductive. At high temperatures, it forms a passivation layer of silica to protect it from further oxidation. The thermal stability of MoSi2 and the thermal stability of its high radiation make such materials and high radiation coatings in thermal shields from the atmosphere as they are used next to WSI2. MoSi2 is a material with a four-square crystal structure (α-modified) gray metal; its β-modification is hexagonal and unstable. It is insoluble in most acids but is dissolved in nitric acid and hydrofluoric acid.
 
Although MoSi2 has excellent oxidation and high Young's modulus at temperatures above 1000 ° C, it is brittle at lower temperatures. Moreover, at 1200 ° C or more, it will lose creep resistance. These properties are limited to their structural materials but can be shifted by using it as a composite with another material. 

Molybdenum disilicide (MoSi2) is a promising candidate material for high-temperature structural applications. It is a high melting point (2030 C) material with excellent oxidation resistance and a moderate density (6.24 g/cm3). However, low toughness at low temperatures and high creep rates at elevated temperatures have hindered its commercialization in structural applications. Much effort has been invested in MoSi2 composites as alternatives to pure molybdenum disilicide for oxidizing and aggressive environments. Molybdenum disilicide-based heating elements have been used extensively in high-temperature furnaces. The low electrical resistance of silicides in combination with high thermal stability, electron-migration resistance, and excellent diffusion-barrier characteristics is important for microelectronic applications. Feel free to send an inquiry to get the latest price if you would like to buy Molybdenum Silicide MoSi2 Powder in bulk.


Characteristics of Molybdenum Silicide MoSi2 Powder:
Molybdenum silicide MoSi2 powder (CAS 12136-78-6) has high melting point, high corrosion resistance, high oxidation resistance, good electrical conductivity, high temperature ductility, a binary alloy system the intermediate phase, dual characteristics of metals and ceramics.

Technical Parameter of Molybdenum Silicide MoSi2 Powder:

Product Name MF Purity Particle Size Melting Point Density Color
molybdenum silicide MoSi2 99% 5-10um 2030℃ 6.24g/cm3 dark gray


Chemical Composition of Molybdenum Silicide MoSi2 Powder:

MoSi2 Mo Si C S Fe S Ni
>99% >60% balance 0.2% 0.02% 0.19% 0.015% 0.05%


How is Molybdenum Silicide MoSi2 Powder produced?
Molybdenum disilicide and MoSi2-based materials are usually made by sintering. Plasma spraying can be used to produce dense monoliths and composite forms. The material produced by this method may contain a certain proportion of β-MoSi2 due to its rapid cooling.

Applications of Molybdenum Silicide MoSi2 Powder:
Molybdenum disilicide heating elements can be used for temperatures up to 1800 ° C, in electric furnaces used in laboratory and production environment in the production of glass, steel, electronics, ceramics, and in heat treatment of materials. Molybdenum disilicide is used in microelectronics as A Contact Material.
Heating element
MoSi2 is a conductive silicide that has an oxidation property due to a stable silica layer on its surface at a high temperature.
Although the top MoSi2 element can operate at temperatures up to 1800 ° C, the material is very brittle, which may suffer serious creep during use. However, they have process advantages because they can work under high electrical loads without aging, and will not exhibit increased resistivity during use. They have antioxidant properties in air, oxygen and oxygen-rich atmosphere.
Moreover, they can be used with ammonia, nitrogen, hydrogen, a rare gas, and limited vacuum, but due to the failure of the protective oxide layer, the operating temperature and life can be reduced.
MoSi2 elements are ready-made elements and can be made into a bending or straight form of a variety of sizes. These elements are mainly used in production furnaces and laboratory furnaces in ceramics, glass, steel, electronics and heat treatment industries.
High-temperature structure
Amazingness and high-temperature elasticity make MoSi2 a very promising material for high-temperature applications such as gas turbine engines. Many researchers strive to improve high temperature creep resistance and low-temperature ductility. However, there are no commercially available composites with all preferred features.


SEM of Molybdenum Silicide MoSi2 Powder:


XRD of Molybdenum Silicide MoSi2 Powder:

Packing & Shipping of Molybdenum Silicide MoSi2 Powder :
We have many different kinds of packing which depends on the molybdenum silicide MoSi2 powder quantity.
Molybdenum silicide MoSi2 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Molybdenum silicide MoSi2 powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.


Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for high-quality MoSi2 powder, please feel free to contact us and send an inquiry. ([email protected])

 

Molybdenum Silicide Properties

Other Names molybdenum disilicide, MoSi2 powder
CAS No. 12136-78-6
Compound Formula MoSi2
Molecular Weight 152.11
Appearance Gray to Black Powder
Melting Point 1900-2050 °C
Boiling Point N/A
Density 6.23-6.31 g/cm3
Solubility in H2O N/A
Electrical Resistivity 0.0000270 - 0.0000370 ohm-cm
Specific Heat 0.437 J/g-°C (23 °C)
Tensile Strength 185 MPa (Ultimate)
Thermal Conductivity 66.2 W/m-K (23 °C)
Thermal Expansion N/A
Vickers Hardness 900-1200
Young's Modulus N/A
Exact Mass 153.859261
   
   

Molybdenum Silicide Health & Safety Information

Signal Word Warning
Hazard Statements H302-H312-H332
Hazard Codes Xn
Risk Codes 20/21/22
Safety Statements 36
RTECS Number N/A
Transport Information N/A
WGK Germany 3

A preparation developed in China; the comfort and the multifunctional properties of nanomaterials make "dead skin" capable of sensing again. Electronic skin is artificial skin that mimics the function of human skin. Recently, the world-renowned journal Advanced Science reported a simple and highly programmable electronic skin on a leather substrate developed by a Chinese team, which combines the natural complex structure of leather, the comfort of wearing, and the multi-functional properties of nanomaterials. , so that the "dead skin" has the ability to sense again.

In the future, MoSi2 Powder will be used in various high-tech fields, and the market demand for MoSi2 Powder will also be great. Please contact us for more information on MoSi2 Powder.


Inquery us

Our Latest Products

How is Niobium Carbide NbC powder produced?

Niobium carbide (NBC and Nb2C) is a very hard refractory ceramic material, widely used in refractory high temperature materials and cemented carbide additives.…

Silicon Boride SiB6 Powder Applications

Silicon hexaboride, or hexaborosilicide, is a glossy black-grey powder that can be used as a variety of standard abrasives for grinding cemented carbide. It is also used as an antioxidant for engineering ceramic materials, sandblasting nozzles, manuf…

Structure of Molybdenum Carbide Mo2C

Molybdenum Carbide, with the chemical formula Mo2C. It has the characteristics of high melting point and hardness, good thermal stability and mechanical stability.…